A. Uluslararası hakemli dergilerde yayımlanan makaleler :

 

Altın, S, Tankut, T., Anıl, Ö., Demirel, Y., “Response of Reinforced Concrete Beams with Clamps Applied Externally: An Experimental Study”, Elsevier Science, Engineering Structures, Vol. 25, No. 9, pp. 1217-1229, July 2003.

Altın, S., Anıl, Ö., Kara, M.E., “Improving Shear Capacity of Existing RC Beams Using External Bonding of Steel Plates”, Elsevier Science, Engineering Structures, Vol. 27, No.5 pp. 781-791, 2005.

Anıl, Ö., “Improving Shear Capacity of RC T-Beams Using CFRP Composites Subjected to Cyclic Load”, Elsevier Science, Cement & Concrete Composites, Vol. 28, No. 7, pp. 638-649, 2006. (Başlıca Eser)

Anıl, Ö., Altın, S., “An Experimental Study on Reinforced Concrete Partially Infilled Frames”, Elsevier Science, Engineering Structures, Vol. 29, No, 3, pp.449-460, 2007.

Altın, S., Anıl, Ö., Kara, M. E. “Strengthening of R/C Nonductile Frames With R/C Infills: An Experimental Study”, Elsevier Science, Cement & Concrete Composites, Vol. 30, No. 7, pp. 612-621, 2008.

Altın, S., Anıl, Ö., Kara, M. E., Kaya, M., “An Experimental Study on Strengthening of Masonry Infilled R/C Frames Using Diagonal CFRP Strips”, Elsevier Science, Composites Part B: Engineering, Vol. 39, No. 4, pp. 680-693, 2008.

Anıl, Ö., Belgin, Ç., “Review of Bond-Strength Models and Application on CFRP to-Concrete Bonded Joints Across Crack”, Science and Engineering of Composite Materials, Vol 15, No. 2, pp. 141-158, 2008.

Anıl, Ö., “Strengthening of RC T-Section Beams With Low Concrete Strength Using CFRP Composites Subjected to Cyclic Load”, Elsevier Science, Construction and Building Materials, Vol. 22, No. 12, pp. 2355-2368, December 2008.

Altın, S., Kuran, F., Anıl, Ö., Kara, M. E., “Rehabilitation of Heavily Earthquake Damaged Masonry Buildings”, Techno Press, Structural Engineering and Mechanics, Vol. 30, No 6, pp 651-664, December 2008.

Anıl, Ö., Belgin, Ç., “Anchorages Effects on CFRP-to-Concrete Bond-Strength”, Journal of Reinforced Plastics and Composites, Vol. 29, No 4, pp. 539-557, 2010.

Anıl, Ö., Belgin, Ç., Kara, M. E. “Experimental Investigation on CFRP to Concrete Bonded Joints Across Crack”, Techno Press, Structural Engineering and Mechanics, Vol. 35, No 1., pp 1-18, May 2010.

Baran, A., Anıl, Ö., “Nonlinear Finite Element Analysis of Effective CFRP Bonding Length and Strain Distribution Along Concrete-CFRP Interface”, Techno Press, Computers and Concrete an International Journal, Vol. 7, No.5, pp 427-453, October 2010.

Altın, S., Anıl, Ö., Kopraman, Y., Belgin, Ç., “Strengthening of Masonry Infilled Walls Using Mesh Reinforced Layers”, Proceeding of the Institution of Civil Engineering Structures and Building, Vol. 163, Issue SB5, pp. 331-342, October 2010.

Altın, S., Anıl, Ö., Kara, M. E., Kopraman, Y., Mertoğlu, Ç., “Improving Shear Capacity and Ductility of Shear Deficient RC Beams Using CFRP Strips”, Journal of Reinforced Plastics and Composites, Vol. 29, No. 19, pp. 2975-2991, October 2010.

Kantar, E., Erdem, T., Anıl, Ö., “Nonlinear Finite Element Analysis of Impact Behavior of Concrete Beam”, Mathematical and Computational Applications, Vol. 16, No.1, pp. 183-193, 2011.

Kantar, E., Arslan, A., Anıl, Ö., “Effect of Concrete Compression Strength Variation on Impact Behavior of Concrete”, Journal of The Faculty of Engineering and Architecture of Gazi University, Vol. 26, No.1, pp. 115-123, 2011.

Altın, S., Anıl, Ö., Toptaş, T., Kara, M. E., “Retrofitting of Shear Damaged RC Beams using CFRP Strips”, Techno Press, Steel and Composite Structures, Vol. 11, No. 3, pp. 207-223, 2011.

Altın, S., Anıl, Ö., Ocaklı, R.Ö., Kopraman, Y., “Retrofitting of Shear Damaged RC Beams using Diagonal CFRP Strips ”, Journal of Reinforced Plastics and Composites, Vol. 30, No. 17, pp. 1495-1507, 2011.

Bulut, N., Anıl, Ö., Belgin, Ç.M., “Nonlinear Finite Element Analysis of RC Beams Strengthened with CFRP Strip against Shear”, Techno Press, Computers and Concrete, Vol. 8, No. 6, pp. 717-733, 2011.

Anıl, Ö., Bulut, N., Ayhan, M., “Strain Distribution between CFRP Strip and Concrete at Strengthened RC Beam against Shear”, Techno Press, Structural Engineering and Mechanics, Vol. 41, No.4, pp. 509-525, 2012.

Kantar, E., Anıl, Ö., “Low Velocity Impact Behavior of Concrete Beam strengthened with CFRP Strip”, Techno Press, Steel and Composite Structures, Vol. 12, No. 3, pp. 207-230, 2012.

Altın, S., Anıl, Ö., Kara, M. E., Kopraman, Y., “Comparison of Seismic Performance of RC Frames Strengthened with Four Different Techniques”, Advances in Structural Engineering, Vol. 15, No. 2, pp. 343-357, 2012.

Anıl, Ö., Tatayoğlu, M., Demirhan, M., “Out-of-Plane Behavior of Unreinforced Masonry Brick Walls Strengthened with CFRP Strips”, Elsevier Science, Construction and Building Materials, Vol. 35, pp. 614-624, 2012.

Anıl, Ö., Tatayoğlu, M., “Improving Out of Plane Behavior of Aerated Concrete Walls with Carbon Fiber-Reinforced Polymer Strips”, Journal of Reinforced Plastics and Composites, Vol. 31, No. 23, pp. 1601-1615, 2012.

Altın, S., Anıl, Ö., Kopraman, Y., Kara, M.E., “Hysteretic Behavior of RC Shear Walls Strengthened with Cfrp Strips”, Elsevier Science, Composites Part B: engineering, Vol. 44, No. 1, pp. 321-329, 2013.

Anıl, Ö., Akbaş, S.O., Kantar, E., Gel, A.C., “Vibration Measurement of Cooling System and Vulnerability Analysis with Finite Element Methods”, Techno Press, Smart Structures and Systems, Vol. 11, No. 2, pp. 199-215, 2013.

Babagiray, G., Akbaş, S.O., Anıl, Ö., “The Effect of a Shallow Rigid Layer on the Bearing Capacity of Footings on Cohesionless Soils”, Journal of The Faculty of Engineering and Architecture of Gazi University, Vol. 28, No. 1, pp. 187-198, 2013.

Doğan, O., Anıl, Ö., Akbaş, S.O., Kantar, E., Erdem, R.T., “The Effects of Blast-Induced Accelerations on Reinforced Concrete Structures”, Elsevier Science, Soil Dynamics and Earthquake Engineering, Vol. 50, pp. 168-181, 2013.

Anıl, Ö., Uyaroğlu, B., “Nonlinear Finite Element Analysis of Loading Transferred from Column to Socket Base”, Techno Press, Computers and Concrete, Vol. 11, No. 5, pp. 475-492, 2013.

Anıl, Ö., Bulut, N., Arslan, O., “Strengthening of One Way RC Slab with Opening Using CFRP Strips”, Elsevier Science, Construction and Building Materials, Vol. 48, pp. 883-893, 2013.

Erdem, R.T., Kantar, E., Gücüyen, E., Anıl, Ö., “Estimation of Compression Strength of Polypropylene Fibre Reinforced Concrete Using Artificial Neural Networks”, Techno Press, Computers and Concrete, Vol. 12, No. 5, pp. 613-625, 2013.

Anıl, Ö., Kına, T., Salmani, V., “Effect of Opening Size and Location on to Punching Shear Behavior of Two Way RC Slab”, ICE Publishing, Magazine of Concrete Research, Vol. 66, No. 18, pp. 955-966, 2014.

Lachemi, M., Al-Bayati, N., Şahmaran, M., Anıl, Ö., “The Effect of Corrosion on Shear Behavior of Self-Consolidating Concrete Beams”, Elsevier Science, Engineering Structures, Vol. 79, pp. 1-12, 2014.

Alyavuz, B., Anıl, Ö., Bulut, N., “Nonlinear Finite Element Analysis of Masonry Wall Strengthened with CFRP Strips”, Taylor and Francis, Advanced Composite Materials, http://dx.doi.org/10.1080/09243046.2014.976735, 2014.

Yılmaz, M.C., Anıl, Ö., Alyavuz, B., Kantar, E., “Load Displacement Behavior of Concrete Beam Under Monotonic Static and Low Velocity Impact Load”, International Journal of Civil Engineering, Vol. 12, No.4, pp. 488-503, 2014.

Anıl, Ö., Kantar, E., Yılmaz, M.C., “Low Velocity Impact Behavior of RC Slab Have Different Support Type”, Elsevier Science, Construction and Building Materials, Vol. 93, pp. 1078-1088, 2015.

Anıl, Ö., Erdem, R.T., Kantar, E., “Improving the Impact Behavior of Pipes using Geofoam Layer for Protection”, Elsevier Science, International Journal of Pressure Vessels and Piping, Vol. 132, No. 133, pp. 52-64, 2015.

Yıldırım, O., Günay, E., Anıl, Ö., Aygün, C., “Analysis of Skid Type Landing Gear of a Rotary Wing UAV by Experimental and Numerical Methods”, Acta Physica Polonica A, Vol. 127, No. 4, pp. 1170-1175, 2015.

Yılmaz, T., Anıl, Ö., “Low Velocity Impact Behavior of Shear Deficient RC Beam Strengthened with CFRP Strips”, Techno press, Steel and Composite Structure Journal, Vol. 19, No. 2, pp. 417-439, 2015.

Alyousif, A., Anıl, Ö., Sahmaran, M., Lachami, M., Yildirim, G., Ashour, A.F., " Tests of High Performance Fiber Reinforced Concrete Beams with Different Shear Span to Depth Ratios and Main Longitudinal Reinforcement", Sage, Journal of Reinforced Plastics and Composites, Vol. 34, No. 18, pp. 1491-1505, 2015.

Durucan, C., Anıl, Ö., “Effect of Opening Size and Location on to Punching Shear Behavior of Interior Slab-Column Connections Strengthened with CFRP Strip”, Elsevier Science, Engineering Structures, Vol. 105, pp. 22-36, 2015.

Şahmaran, M., Anıl, Ö., Lachemi, M., Yıldırım, G., Ashour, A.F., Acar, F., “Effect of Corrosion on Shear Behavior of Reinforced Engineered-Cementitious Composites Concrete Beams”, American Concrete Institute, ACI Structural Journal, Vol 112, No. 6, pp. 771-782, 2015.

Alyousif, A., Anıl, Ö., Sahmaran, M., Lachami, M., Yildirim, G., Ashour, A.F., "Comparison of Shear Behavior of Engineered Cementitious Composite and Normal Concrete Beam with Different Shear Span Length", ICE Publishing, Magazine of Concrete Research, 10.1680/jmacr.14.00336, 2015.

Anıl, Ö., Durucan, C., Wali Din, S., “Experimental Study on the Stress Distribution at the Interface Between CFRP and Three Different Types of Masonry Units”, Elsevier Science, Composites Part B: Engineering Journal, (Basılmak üzere kabul edildi).

Durucan, C., Anıl, Ö., “A New Empirical Equation for the Punching Shear Capacity Estimation of Two Way Reinforced Concrete Flat Slab Column Connection with Openings”, Techno press, Structures and Mechanics Journal (Hakem incelemesinde).

Anıl, Ö., Akbaş, S.O., Babagiray, S., Gel, A.C., Durucan, C., “Experimental and Finite Element Analysis of Bearing Capacities and Settlement Profiles of Varying Shape Footings on Sand”, Techno press, Geomechanics and Engineering, (Hakem incelemesinde).

Durucan, C., Ulusoy, B., Anıl, Ö., “Nonlinear Finite Element Analyses of Punching Shear Behavior of Two Way RC Slabs with Openings”, Proceedings of the Institution of Civil Engineers: Structures and Buildings, (Hakem incelemesinde).

Anıl, Ö., Akbaş, S.O., Gezer, O., Yılmaz, M.C, “Investigation of Impact Behavior of Steel and Composite Pipes with Protective Layer”, Techno press, Steel and Composite Structures, (Hakem incelemesinde).

Mertoğlu, Ç., Anıl, Ö., Durucan, C, “Bond Slip Model and Strain Distribution of Anchoraged CFRP Strips”, ASCE, Journal of Composites for Construction, (Hakem incelemesinde).

Kaya, N., Anıl, Ö., “Nonlinear FE Analyses of One Way RC Slab with Openings”, Springer, KSCE Journal of Civil Engineering , (Hakem incelemesinde).

Anıl, Ö., Durucan, C., Kara, M.E., Başeğmez, Ö., “Nonlinear 3D Finite Element Analyses of RC Beams Retrofitted Using Externally Bonded CFRP Sheets with or without Anchorages”, Springer, European Journal of Environmental and Civil Engineering, (Hakem incelemesinde).

Anıl, Ö., Erdem, R.T., Tokgöz, M.N., “Investigation of the RC columns under lateral impact loading”, Elsevier Science, Engineering Structures (Hakem incelemesinde).

Anıl, Ö., Togay, A., Karagöz, Ü., Söğütlü, C., Döngel, N., “Hysteretic Behavior of Timber Framed Shear Wall with Openings”, Elsevier Science, Construction and Building Materials Journal, (Hakem incelemesinde).

Togay, A., Anıl, Ö., Karagöz, Ü., Ediz, İ., Durucan, C., “Finite Element Analysis of Timber-Framed Shear Walls With and Without Opening”, Thomas Telford, Journal of Earthquake Engineering (Hakem incelemesinde).

Yıldizel, S.A., Kantar, E., Öztürk, A.U., Anıl, Ö., “An Approach to Risk and R&D Management for Construction Companies”, Risk Management An International Journal, (Hakem incelemesinde).

Anıl, Ö., Şahmaran, M., Yıldırım, G., “Self Healing Performance of Engineered Cementitious Composite Reinforced Concrete Beams with Different Shear Span to Depth Ratios”, American Concrete Institute, ACI Structural Journal (Çeviride).

Altın, S., Anıl, Ö., Kopraman, Y., Baran, M., Kara, M.E., “Hysteretic Behavior of Lightly Reinforced RC Shear Walls Strengthened with CFRP and Steel Strips”, Elsevier Science, Composite Part B: engineering, (Yazım aşamasında).

 

B. Uluslararası bilimsel toplantılarda sunulan ve bildiri kitabında (Proceedings) basılan bildiriler :

 

Altın, S., Anıl, Ö., “Kesmeye Karşı Güçlendirilmiş Betonarme Kirişlerin Deprem Davranışı” ECAS2002 Uluslararası Yapı ve Deprem Mühendisliği Sempozyumu 14 Ekim 2002, Orta Doğu Teknik Üniversitesi, Ankara, Türkiye, Sf. 168-175.

Anıl, Ö., Altın, S., “Betonarme Parçasal Dolgu Duvarlı Çerçeveler”, Altıncı Uluslararası İnşaat Mühendisliğinde Gelişmeler Kongresi, 6-8 Ekim 2004, Boğaziçi Üniversitesi, İstanbul, Türkiye, Sf. 141-150.

Altın, S., Anıl, Ö., Kara M.E., ”Improving Seismic Behavior of Infilled R/C Frames with Column Lap Splices”, Seventh International Congress on Advances in Civil Engineering, October 11-13, 2006, Yıldız University, İstanbul, Türkiye.

Altın, S., Anıl, Ö., Kara M.E., ”Behavior of Masonry Infilled RC Frame Strengthening With CFRP”, 8th International Congress on Advances in Civil Engineering, September 11-13, 2008, Eastern Mediterranean University, Famagusta, North Cyprus.

Anıl, Ö., Belgin, Ç.M., “The Effect of Anchorage Type on Stress Distribution Between CFRP and Concrete Surfaces”, 8th International Congress on Advances in Civil Engineering, September 11-13, 2008, Eastern Mediterranean University, Famagusta, North Cyprus.

Altın, ,S., Toptaş, T., Anıl, Ö., Kara M.E., “Retrofitting of Shear Deficient RC Beams Using CFRP Strips”, International Earthquake Symposium, Kocaeli 2009, August 17-19, 2009, Kocaeli University, Türkiye.

Altın, S., Anıl, Ö., Kara M.E., Kopraman, Y., “Improving Shear Capacity and Ductility of Shear Deficient RC Beams Using CFRP Strips”, Sakarya International Symposium of Earthquake Engineering, October 1-3, 2009, Sakarya University, Türkiye.

Doğan, O., Akbaş, S.O., Anıl, Ö., Ünsal, N., “A Study on the Relationship of Blast-Induced Surface Acceleration with the Quantity of and Distance from the Explosive Material”, 9th International Congress on Advances in Civil Engineering, September 27-30, 2010, Karadeniz Technical University, Trabzon, Turkey.

Gel, A.C., Anıl, Ö., Akbaş, S.O., “Bearing Capacity of Rectangular Footings on Sand Layer Overlying Rock”, 9th International Congress on Advances in Civil Engineering, September 27-30, 2010, Karadeniz Technical University, Trabzon, Turkey.

Kantar, E., Erdem, T., Anıl, Ö., “Nonlinear Finite Element Analysis of Impact Behavior of Concrete Beam”, 1st International Symposium on Computing in Science & Engineering, June 3-5, 2010, Gediz University, Aydın, Turkey.

Kantar, E., Erdem, T., Anıl, Ö., Akbaş, S.O., “Analysis of Reinforced Concrete Structures under the Effect of Various Surface Accelerations”, Second International Symposium on Computing in Science & Engineering, 2011, Gediz University, Aydın, Turkey.

Gel, C., Akbas, S. O., Anil, Ö., “Comparison of the performance of rectangular footings on cohesionless soils reinforced with geogrid and geotextile“, ISSMGE-TC 211 International Symposium on Ground Improvement, 2012, IS-GI Brussels, Belgium.

Bulut, N., Anil, Ö., “Out-of-Plane Behavior of Unreinforced Masonry and Aerated Concrete Walls Strengthened With CFRP Strips“,10th International Congress on Advances in Civil Engineering, 2012, Middle East Technical University, Ankara, Turkey.

Gel, C., Akbas, S. O., Anil, Ö., “An experimental study on the performance of eccentrically loaded footings on cohesionless soil reinforced with nonsymmetrical geogrid layers“, 3rd International Conference on New Developments in Soil Mechanics and Geotechnical Engineering, 28–30 June 2012, Near East University, Nicosia, North Cyprus.

Güzey, Ö., Aksoy,  E., Gel, A.C., Anil, Ö., Gültekin, N., Akbas, S.O., “An Inter-Disciplinary Approach for Earthquake Vulnerability Assessment in Urban Areas: A Case Study of Central District, Yalova” , Regional Studies Association, Annual European Conference University of Tampere, 2013, Finland.

Yıldırım, O., and Günay, E., Anıl, Ö., Aygün, C., “Analysis of a Skid Type Landing Gear of a Rotary Wing Unmanned Air Vehicle by Means of Experimental and Finite Element Methods”, 4th International Advances in Applied Physics and Materials Science Congress & Exhibition, APMAS 2014, Fethiye, Turkey.

Anıl, Ö., Durucan C., “Effect of Opening Location on the Punching Shear Behavior of Two Way RC Slabs”, ICESA 2014, International Civil Engineering & Architecture Symposium for Academicians, Side, Antalya, Turkey.

Anıl, Ö., Kaya, N., “Strengthening of One Way RC Slab with Opening using CFRP Strips”, ICESA 2014, International Civil Engineering & Architecture Symposium for Academicians, Side, Antalya, Turkey.

Anıl, Ö., Akbaş, S.O., Gezer, O., Yılmaz, M.C., “Investigation of Impact Behavior of Steel Pipes with Protective Layer”, ICESA 2014, International Civil Engineering & Architecture Symposium for Academicians, Side, Antalya, Turkey.

Anıl, Ö., Akbaş, S.O., Babagiray, S., Belgin Ç.M., Ünsal, N., “Experimental and Analytical Investigation of Baring Capacity of Irregularly Shaped Footings on Sand”, ICESA 2014, International Civil Engineering & Architecture Symposium for Academicians, Side, Antalya, Turkey.

Anil, Ö., Akbaş, S.O., Gezer, O., Yılmaz M.C., “Investigation of Impact Behavior of Steel and Composite Pipes with Three Different Protective Layers“, 11th International Congress on Advances in Civil Engineering, 2014, İstanbul Technical University, İstanbul, Turkey.

Anil, Ö., Togay, A., Söğütlü, C., Döngel, N., Karagöz, Ü., Ediz, İ., “Experimental Analysis of Hysteretic Load Behavior of Timber Framed Shear Walls with Openings“, 11th International Congress on Advances in Civil Engineering, 2014, İstanbul Technical University, İstanbul, Turkey.

Tokgöz, M.N., Anil, Ö., "Experimental Investigation of Reinforced Concrete Columns' Impact Behavior", 5th International Earthquake Symposium, 2015, Kocaeli University, Kocaeli, Turkey.

 

D. Ulusal hakemli dergilerde yayımlanan makaleler :

EI tarafından taranan dergilerdeki makaleler:

 Altın, S., Anıl, Ö., Gökten, Y., “Betonarme Kirişlerin Kesmeye Karşı Güçlendirilmesinde Bir Kelepçe Uygulaması”, Gazi Üniversitesi Müh. Mim. Fak. Dergisi, Cilt 19, Sayı 4, sayfa 415-422, 2004.

Anıl, Ö., Belgin, Ç., “Monotonik Yükleme Etkisi Altındaki Dikdörtgen Kesitli Betonarme Kirişlerin Sonlu Elemanlar Yöntemi İle Doğrusal Olmayan Analizi”, Gazi Üniversitesi Müh. Mim. Fak. Dergisi, Cilt 22, Sayı 1, sayfa 191-197, 2007.

Alyavuz, B., Anıl, Ö., “Kolonlardan Yuvalı Temellere Aktarılan Yüklemenin Lineer Olmayan Sonlu Elemanlar Yöntemi İle Analizi”, Gazi Üniversitesi Müh. Mim. Fak. Dergisi, Cilt 22, Sayı 3, sayfa 471-479, 2007.

Ulusal hakemli dergilerdeki makaleler:

Öztorun, N. K., Altın, S., Anıl, Ö., “Eksenel Simetrik Silindirik Duvarların Beş Moment Denklemi ile Analizi”, Gazi Üniv., Müh. Mim. Fak. Dergisi, Cilt 11, No. 2, Sf. 55-72, (1996).

Öztorun, N. K., Anıl, Ö., “Çok Katlı Yapılarda Merdivenlerin Sonlu Eleman Yöntemi ile Analizi”, İMO Teknik Dergi, Cilt 10, Sayı 2, Sf. 1941-1961, (Nisan 1999).

Uyaroğlu, B., Anıl, Ö., “Yuvalı Temel Kolon Birleşimi Yük Aktarım Mekanizmasının İncelenmesi ve Sonlu Elemanlar Yöntemi ile Analizi”, Beton Prefabrikasyon Dergisi, Sayı 108, Sf. 11-18, Kasım 2012.

 

E. Ulusal bilimsel toplantılarda sunulan ve bildiri kitaplarında basılan bildiriler :

 

Anıl, Ö., Altın, S., “Özel Bir Kesme Donatısı: Deneysel Çalışma”, Türkiye İnşaat Mühendisliği XVI. Teknik Kongre ve Sergisi Bildiriler Kitabı, 1-3 Kasım 2001, Ankara, Sf. 1-13.

Altın, S., Anıl, Ö., “Betonarme Kirişlerin Dıştan Yapıştırılan Çelik Plakalarla Kesmeye Karşı Güçlendirilmesi”, TÜBİTAK İÇTAG Araştırma Grubu Yapı Mekaniği Laboratuvarları Toplantısı, 5-6 Kasım 2001, Ankara, Sf. 13-18.

Anıl, Ö., Altın, S., “Parçasal B/A Dolgu Duvarlarıyla Güçlendirilen B/A Çerçevelerin Tersinen Yükler Altında Davranışı”, TÜBİTAK İÇTAG Araştırma Grubu 2. Yapı Mekaniği Laboratuvarları Toplantısı, 19-20 Haziran 2003, Konya, Sf. 117-122.

Kara, M. E., Anıl, Ö., Ataman, S., Gün, B., Mertoğlu, S., Gündoğdu E., Altın, S., “Sünek Olmayan B/A Çerçevelerin Parçasal B/A Dolgu Duvarlarıyla Güçlendirilmesi”, TÜBİTAK İÇTAG Araştırma Grubu 2. Yapı Mekaniği Laboratuvarları Toplantısı, 19-20 Haziran 2003, Konya, Sf. 33-38.

Altın, S., Anıl, Ö., Kara, M.E., “Betonarme Kirişlerin Dıştan Yapıştırılan Çelik Levhalarla Kesmeye Karşı Güçlendirilmesi”, XVII. Teknik Kongre ve Sergisi Bildiriler Kitabı, 15-17 Nisan 2004, İstanbul, Sf. 124-128.

Altın, S., Kuran, F., Kara, M.E., Anıl,Ö., “Yığma Yapıların Rehabilitasyonu İçin Bir Yöntem”, DGA2005-Yığma Yapıların Deprem Güvenliğinin Artırılması Çalıştayı, ODTÜ, Ankara,Türkiye (17 Şubat 2005), Sf 83-89.

Altın, S., Anıl,Ö., Kopraman, Y., Belgin, Ç.M., “Dolgu Duvarı Hasır Çelik Donatılı Özel Sıva İle Güçlendirilmiş Betonarme Çerçevelerin Davranışı”, Yedinci Ulusal Deprem Mühendisliği Konferansı, 30 Mayıs-3 Haziran, 2011, İstanbul.

Başçuhadar, M.K., Gel, A.C., Akbaş, S.O., Anıl,Ö., “Ankara-Eskişehir Yolu Üzerinde Bulunan Köprü ve Altgeçitler İçin Zemin Büyütmesi Değerlerinin Mikrotremor İle Tespiti”, Altıncı Kentsel Altyapı Sempozyumu, 14-15 Ekim 2011, Antalya.

Anıl, Ö., Altın, S., Kara, M. E., Kopraman, Y., Mertoğlu, Ç., “Kesmede Yetersiz Betonarme Kirişlerin CFRP ile Dayanım ve Sünekliğinin Artırılması”, 1. Türkiye Deprem Mühendisliği ve Sismoloji Konferansı, 11-14 Ekim 2011, Ankara.

Tozlu, Z., Anıl, Ö., Şahmaran, M., “6306 Sayılı Kentsel Dönüşüm Yasası Kapsamında Yer Alan Hızlı Değerlendirme Tekniğinin Geniş Kapsamlı Saha Uygulaması: Niğde Örneği”, 3. Türkiye Deprem Mühendisliği ve Sismoloji Konferansı, 14-16 Ekim 2015, İzmir.

 

F. Diğer yayınlar :

 

Altın, S., Anıl, Ö., Kara, M. E., “Betonarme Kirişlerin Kesmeye Karşı Güçlendirilmesi İçin Bir Yöntem”, Yapı Dünyası, Yıl 10, Sayı 109, Sf 41-48 (Nisan 2005).

Altın, S., Anıl, Ö.,"Parçasal Betonarme Dolgu Duvarlı Çerçevelerin Davranışı", İMO, İzmir Şubesi Haber Bülteni, Sayı 127, Sf 127-135, (Mart 2006).

Anıl, Ö., Altın, S., “Betonarme Parçasal Dolgu Duvarlı Çerçeveler”, Yapı Dünyası, Sayı 145, Sf 41-45 (Nisan 2008).